Clip Bands
The 12 bands in the box are stackable clip bands, and heavier ones like this 30–120 lbs band can be added any time. They clip straight onto the C-rings. Stack more for more resistance; unclip one for a drop set.
Black Friday: A Free Adjustable Bench ($289 Value) With Every FLEXICON. Ends Monday, November 30, at midnight Eastern. Only 18 left.Get Yours Now
Where Band Training Goes Next
A New Class Of Workout Machine.
FLEXICON puts stackable and loop resistance bands on a steel tower, so you get the real gym lifts with smooth band tension instead of iron. Heavy when you want it. Easy on your joints. No spotter.
Order FLEXICON, $1,699.00Watch With Sound · 4 Minutes
The whole tower in four minutes: the bands, the handles and bar, the arms and stopper settings, and the lifts. Watch how fast the set-up changes between exercises, and how smooth the bands feel from the bottom of each rep to the top.
See Every FLEXICON ExerciseA dumbbell weighs the same at every point of the lift: 50 lbs at the top is 50 lbs at the bottom. So you carry the full weight at the bottom, where your elbows, shoulders and knees are most exposed and you're weakest. That's where the old injuries flare up.
A band is the opposite. It's lightest at the bottom and heaviest near the top, where your muscles are strongest. FLEXICON locks that tension into a guided path, so the lift is smooth from the first inch to the last.
Each step adjusts to your body, so the tower fits you, not the other way round.
Slide the stopper arms to the number of holes for your exercise. The main arms rest there between reps.
Flat, incline or decline, or roll it away for standing work.
Handles for one arm at a time, or the long bar for both together. Turn them to any angle.
Clip stackable bands or loop bands to the C-rings. More bands, more resistance. It takes seconds.
Every exercise in the exercise library lists its exact settings, with a set-up video.
Patented Design
A weight stack only pulls one way. FLEXICON's anchor points pull from above you, below you and beside you, which is how one tower covers your whole body.
The side arms rotate and telescope to pull from overhead: lat pulldowns, high rows, triceps work.
C-rings on the platform anchor bands at floor level: calf raises, curls, hamstring curls.
Swing the side arms out wide for flys and reverse flys, pulling across the body.
Rotate 180° · Telescope
The upper side arms swing and extend. Point them up for resistance from above, like a lat pull. Swing them out for resistance from the side, like a chest fly.
Fully extended, the side arms reach about 7 to 8 feet wide. Tuck them in when you don't need them.
FLEXICON uses both stackable resistance bands and loop resistance bands. Every C-ring takes either one, so you're never locked into one kind of band.
The 12 bands in the box are stackable clip bands, and heavier ones like this 30–120 lbs band can be added any time. They clip straight onto the C-rings. Stack more for more resistance; unclip one for a drop set.
Add loop bands any time. They loop onto the same anchor points, alone or with clip bands.
Six In The Box
Every FLEXICON comes with six clip-able loops. They work like a door anchor: clip a loop onto the tower and it gives you a safe loop to thread a band through, so you can anchor a band at its middle.
Never thread a band through a C-ring. Its edge can cut the band. The loops keep the band safe, and you can clip them on wherever you need an anchor point, which is why the exercises on FLEXICON are unlimited.
Set By The Number Of Holes
Different exercises need different starting positions. The telescoping stopper arms set where the main arms start, so a bench press and a shoulder press each begin at the right height.
Between reps and at the end of a set, the main arms rest on the stopper arms. No bar to get pinned under. No spotter.
“As an aging athlete with countless aches and pains from years of military service … the smooth resistance lets me load up without worrying about failing under the bar.”
FLEXICON uses stackable and loop resistance bands attached to C-rings on a steel tower. Stackable bands clip on; loop bands loop on. The bands pull against the main arms, side arms or handles. Add bands for more resistance and take them off for less. FLEXICON gives hundreds of pounds of resistance per side.
A free weight weighs the same through the whole lift, so the joints carry the full weight at the bottom, where they are least stable. A band is lightest at the bottom of a lift and heaviest near the top, where muscles are strongest. FLEXICON guides that tension along a fixed path.
No. FLEXICON is powered by resistance bands, so there is nothing to plug in and no monthly fee. The set-up video for every exercise is free in the Bodylastics app.
FLEXICON uses both stackable resistance bands and loop resistance bands; its C-rings take either. It comes with 12 stackable clip bands, 2 each of 6 resistance levels, each with an inner safety cord; you can add more clip bands or loop bands at any time.
FLEXICON comes with six clip-able loops that work like a door anchor. Clip a loop onto the tower and thread a band through it to anchor the band at its middle. Never thread a band through a C-ring, which can cut the band; the loops keep the band safe.
The stopper arms on FLEXICON telescope to set the starting height of the main arms, because different exercises need different starting positions. The main arms rest on the stopper arms between reps, which is why FLEXICON needs no spotter.
Yes. With the handles, each main arm moves on its own, like dumbbells. With the long bar attached, both arms move together, like a barbell.
Setting up an exercise takes four steps: set the stopper arms, set the bench, set the handles and clip on the bands. Every exercise has its settings and a set-up video in the FLEXICON exercise library.
$1,699.00. Free shipping. 60 days to decide. We pay return shipping.
Add To Your Order
Free shipping. Secure checkout on Shopify. 60 days to decide, and we pay return shipping.
Returns And Refunds